Recording stops

[The Mad Builder]

while recording motions in track mode, the servos stop responding after about 30 seconds. I can get one track recorded but when I try to do another track it freezes about 30 seconds in. Any ideas?

[[email protected]]

When you record your first track, how long is it? All subsequent tracks will only be as long as the first one.

You should check your power as well. You want to be powering the board with at least 6-9V through the Vin and GND screw terminals. Depending on your servos, you may want to power them separately by using a 2nd power supply on the SVin and GND screw terminals. You will need to change the jumpers to match.

Andre